Worktop holder (for Dewalt ToughSystem)

✔️ Secure attachment of worktops and other attachments to your case system.

✔️ Festivals Secured via the ToughSystem locking mechanism (1.0 / 2.0) and easy insertion using precisely fitting adapter feet. Choose the appropriate variant – these differ slightly .

✔️ Extra slim design - No gap between the case and the worktop. Robust design and Solid 3D printed .

✔️ When used with ToughSystem 2.0 cases, the lock remains in position after opening .

✔️ Package includes: two (2) locking brackets and four (4) adapter feet. Case, worktops, or mounting hardware are not included.

✔️ Compatibility:

ToughSystem 1.0:

DS150 suitcase (Dewalt) DWST 1-70-321)

DS300 suitcase (Dewalt) DWST 1-70-322)

ToughSystem 2.0:

Case DS165 ( Dewalt DWST83293-1)

Case DS400 ( Dewalt DWST83342-1)

Toolbox DS450 ( Dewalt DWST83295-1)

Mount the two brackets to the cut-to-size worktop and place the adapter feet in the center of the cases. Attach double-sided adhesive tape or masking tape to the adapter feet. We recommend completing this process for one side before mounting the other.

Now, carefully place the worktop with the holder onto the case. It's correctly positioned when the TSTAK locking mechanism is vertical.

Remove the worktop. The adapter feet should now be optimally aligned and adhered to the worktop.

Attach these adapter feet with screws. Repeat the installation of the adapter feet on the other side. Your worktop should then be held securely and perfectly level.

Compatibility with other suitcases cannot be guaranteed - please contact us if you have any doubts. Cases, worktops, and mounting hardware are not included. The products offered are not from Dewalt.